14
MICRO DVR MENUS
7.1 PASSWORD CHANGE
The Factory Default Password is 0000. To enter this number, press the UP/DOWN button on the remote con-
troller. Once you input the current password, set a new six digit password using the numbered buttons UP,
REW, DOWN, FF on the remote controller. Then, confirm your new password by entering the number again.
7.2 TIME SET
Configure current time and ‘day light saving’ option. When you set up current time, the field order should be as
follows:
2007/11/30 = year/month/day 19:44:32 = hour/minute/second
7.2.1 DAY LIGHT SAVING (ON/OFF): SELECT ‘ON’ when you want to use day light saving time. You
can set up a time of period when day light saving is applied.
7
HARDWARE INSTALLATION
SD MEMORY INSTALLATION
1. Format Micro SD Memory
Insert Micro SD memory into SD card slot on your PC and format it in FAT32.
*In case there is no card slot on your PC, use additional memory reader device.
2. Insert Micro SD Memory into SD slot on the Clock/Radio DVR.
After formatting, take SD Memory from your PC and insert it into SD slot on the Clock/Radio DVR located
in the battery compartment on the bottom of the clock/radio.
3. Backup recorded files in SD Memory.
When SD Memory storage is full, the recorded files can be backed up on your PC. Insert the Micro SD
card on your PC and move the files you want to back up to the HDD on your PC by using windows ex-
plorer. You can check each recorded file through the AK Viewer software.
SanDisk SD is recommended due to the compatibility with the Clock/Radio DVR. There is no guarantee of
compatibility with other makers’. A standard capacity SD card is recommended not a high capacity one.
CONNECTING THE CLOCK/RADIO DVR TO YOUR TV SET OR MONITOR
1. Video Input/Output Connection (For TV / monitor screen display)
To display the Clock/Radio DVR’s picture, the video output signal needs to be transferred to your TV set or
monitor. Any TV set that has a VIDEO INPUT terminal is suitable for displaying the picture. The figure above
shows the video signal line connection.
Using a BNC cable, connect the VIDEO IN terminal of your TV to the VIDEO OUT terminal of your Clock/Radio
DVR.
NOTE: The BNC cable required for this connection does not come packaged with the Clock/Radio DVR.
7
(28 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce